News
Servicing the Toilet Pan
Remove the hose connection (7 or V7) from the back pipe (9 or VE9) by slackening the jubilee clip (8 or VE8) and easing the hose connection off. Undo the...
Servicing the Toilet Pan
Remove the hose connection (7 or V7) from the back pipe (9 or VE9) by slackening the jubilee clip (8 or VE8) and easing the hose connection off. Undo the...
Procedure to Avoid Frost Damage in Water
Close both seacocks and hang a notice on the toilet to ensure that people do not use it. Disconnect the inlet pipe from the flushing pump and the seacocks and...
Procedure to Avoid Frost Damage in Water
Close both seacocks and hang a notice on the toilet to ensure that people do not use it. Disconnect the inlet pipe from the flushing pump and the seacocks and...
Cleaning and Refitting Parts
All rubber, leather and copper asbestos parts should be replaced at every overhaul. It is important to note that the two copper and asbestos washers (22 or VE22) have different...
Cleaning and Refitting Parts
All rubber, leather and copper asbestos parts should be replaced at every overhaul. It is important to note that the two copper and asbestos washers (22 or VE22) have different...
Removal and Replacement of the Wheel Control Va...
If there is a continual trickle of flushing water into the pan, when the safety control valve (11 or VE11) is worn, the solution is replacement of the complete unit....
Removal and Replacement of the Wheel Control Va...
If there is a continual trickle of flushing water into the pan, when the safety control valve (11 or VE11) is worn, the solution is replacement of the complete unit....
Servicing the Flushing Pump
General On Re-assembly always replace the rubber, leather and copper/asbcstos parts - all these components are provided in the cruising spares kits. Only apply semi-hardening jointing compound where specified. Also...
Servicing the Flushing Pump
General On Re-assembly always replace the rubber, leather and copper/asbcstos parts - all these components are provided in the cruising spares kits. Only apply semi-hardening jointing compound where specified. Also...
Servicing the Discharge Pump
General On re-assembly always replace the rubber, leather and copper/asbestos parts- all these components are provided with the Cruising spares kits (see section 4, TABLE B). Note: only use jointing...
Servicing the Discharge Pump
General On re-assembly always replace the rubber, leather and copper/asbestos parts- all these components are provided with the Cruising spares kits (see section 4, TABLE B). Note: only use jointing...