Servicing the Toilet Pan

Remove the hose connection (7 or V7) from the back pipe (9 or VE9) by slackening the jubilee clip (8 or VE8) and easing the hose connection off.

Undo the cap nut (5 or VE5) using spanner G. Remove the cap nut and washer (6 or VE6). Pull out the back connection (4 or VE4) complete with washer (6 or VE6). 

The toilet pan (59A) can be removed by unscrewing the four retaining bolts (56A). Replace if necessary the pan joint (55 or V55) and retaining bolt washers (all supplied with cruising spares kits). 

ASSEMBLE IN REVERSE. 

NOTE: apply silicon sealant to the pan joint (55 or VE55).